39508 I/O Scanner IOS: Bypass not allowed on this I/O Gravure Japanese_Newspaper_OEM_Engine Lotem_400_Fiber_Head_Machine Lotem_800_Fiber_Head_Machine Lotem_Quantum Magnus_400 Magnus_800 Magnus_VLF Slave_MCE_Firmware Thermoflex Think_Motion_Controller Trendsetter_400/800 Trendsetter_NEWS Trendsetter_Series_4 An attempt was made to set a bypass status for either a discrete I/O point or a group input (Analog input) for which bypassing is not allowed The I/O point can't be bypassed. The original problem leading to the bypass attempt must be rectified. This error is reported. Most systems contain air-driven devices. To the firmware, they all work in a similar manner. They are stable at either position 'A' or 'B' as indicated by the state of discrete sensors at these positions. In these cases the sensors supplies only final verification of a blind actions against hard mechanical stops. If these sensors malfunction, they may be bypassed (temporarily) to allow the machine to continue with a diminished throughput. Sensors associated with stepper motors or plate length measurement are used in real-time control and may not be bypassed. An attempt to set bypass status for one of these types of sensor results in this error 08-JAN-2001 Automated conversion to new FW1 error template. ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:20 2008 PST